How to sew a 4 hole button with a sewing machine

Is it difficult to sew a four-hole button? Although sewing may seem difficult, it’s actually the easiest part. The buttons with four holes are most common and used in almost every garment. This has nothing to do with professionalism, steps, or anything. It’s almost like you know how to get out once you have entered.

How To Sew A 4-Hole Button

This is not difficult work. All you need are a few sewing things you can count on your fingers. A 4-hole button is required. You also need a thread, needle, and a pair of scissors.

For more precision, you might also need a ruler and some pins. These accessories will make it easy to sew the button. You will need to insert the thread using the needle into one of the buttons’ holes.

Next, insert the needle into the second, third, and fourth holes. Once you have done this, tie a knot and then cut the cord. Now you can start stitching! Let’s discuss the different steps and methods.

Method 1 – Sew a 4-Hole Button using a Sewing Machine

Some sewing machines have additional button functions and button feet. Button feet are used to attach buttons easily by a machine. The footholds the button securely in place.

This allows for a clear view of all the stitching areas. The rubberized grip, which is horseshoe-shaped, prevents the button from sliding out of its place. The button foot is the only part of a machine that can be used to sew buttons.

If you have a zig-zag sewing machine, you will also need a button foot. Although you can sew buttons with a regular foot, a button-foot is extremely convenient. Most importantly, a model such as brother lx3817 can bring tremendous results with this method.

Step 1 – Under The Foot, Keep The Button In Position

 It must be kept in place without being moved. It is fine to remove a large button, but it is best to use a glue stick to attach it to the wall. A small dab of glue would do, but the transparent tape is also possible. Some people find the tape does its job better than others. Make sure the tape is not in the buttonholes.

Step 2 – Insert The Button Spacer

Place the button spacer where you’ll need it to ensure that your button can fit into a buttonhole. After sewing the button on, raise it slightly. This space is not necessary if the button is being used for decorative purposes.

However, if the button is to be used as a fastener, it should be raised slightly between the button seam and the fabric. There is no requirement to use any spacers; all you need to do is use a toothpick and the thin plastic scale.

Step 3 – Set The Stitches’ Number

These stitches will suffice if you have a button with two holes. If you are making a four-hole button, you will need to do the same thing as the others. Move the fabric, so the two remaining holes are under the foot. Always go slow.

Step 4 – Turn The Thread Back To Your Garment

Attach the thread at the end to your fabric. Tie a knot or make small stitches, then cut the thread. You can now sew the four-hole button quickly and easily.

Method 2- Manually Sew A 4-Hole Button

You can sew buttons with a machine, but let’s not forget about the traditional method of hand sewing.

Step 1- Thread The Needle

Tie a knot at each end. Your button’s size will determine the length of your thread, but it should not exceed 15-20 inches. Double the string to make it stronger. This button should be held! Use a color that is consistent with your fabric.

A tail can be added after you tie the knot to make it more secure. However, an automatic needing theater can assist you the best. Read singer 4423 reviews to find out.

Step 2 – Hold Your Button Over the Fabric

Place the button on the cloth where you want it to be on the fabric. If necessary, use a ruler to determine the location of the buttonhole on that side. Holding the button in place, pull the threaded needle through the fabric to the back of the hole in the button. Pull gently until the excess thread/knot reaches the back.

Step 4 – Push The Needle Neatly Via The Second Hole

Push the needle via the second hole, from the front to the back of the button. Pull gently while making sure all excess thread is gone. To be functional, there should be a little extra between the button and fabric.

Take a look at one of your shirts to get an idea. This problem is magnified if the button has a clasp or buttonhole. To ensure your thread isn’t pulled taut, place a pin/needle between the holes of your button and then start stitching. When you’re done stitching, remove the pin.

Step 5 – Make An X With The Thread

You have now passed the thread through the buttons’ two holes. You will now be creating an “X” by threading the thread through all four buttons. It doesn’t matter if you create an “X,” but instead create two straight lines like “I I.” No matter what you choose, be consistent when sewing.

Step 6 – Push The Thread In The 3rd Hole And Then The 4th

Push the threaded buttonhole up. The threaded needle should be pushed down through the third buttonhole. Push the buttonhole to the top. Push the buttonhole up to the fourth hole.

Step 7 – Repeat The Process and Push The Thread Needle

Continue pushing the threaded needle upward through the first hole, then down the second. Next, push the needle up through the third hole, then down the fourth. Continue this process at least twice more until you determine if the threaded needle is strong enough for the final stages.

Step 8 – Pull It Lightly To Acknowledge The Sew

To check if the thread has been pushed through both holes, pull your button gently. If the button seems strong enough to continue, you can move on to step 2. Wrap the thread under the button but above the fabric to add strength and space. If necessary, remove the pin from Step 4.

Step 9 – Repeat The Process

The threaded needle should be pushed through the second hole at the button’s front. Your needle should be between the button’s fabric and the button. Wrap your thread around the button 3 to 5 more times. Then push the needle through the fabric until it reaches the back. This is what you call a “shank,” and it will be used to make your button. 

Step 10 – Final Step To Cut The Thread

Finish by running the threaded needle horizontally through the backseat of the thread stitch two to three times in each direction. To add security, you can pull some of the fabric through. Finally, trim the thread to leave enough material for you to tie.

Next, take the two strands of thread (or four if multiplied) and join them. Then, trim the excess thread. Now your button is ready to be sewn. Opt for a model such as a janome derby sewing machine to ensure amazing sewing results.